FlexiShield® is designed specifically for acrylic plates, with a crystal-clear finish, self-healing surface, and protection against everyday scratches, marks, and road grime. Follow the step-by-step guide below or watch the install video, because let’s be honest… watching someone else do it first is way easier.
Install in 3 easy steps
Step 1
Attach your Bracket Buddy® using the supplied M6 bolts and screws (highlighted in red). If they aren't compatible with your vehicle, simply reuse your factory hardware.
Important: If using your own hardware, make sure the screw heads sit flush within the mounting grooves.
Step 2
Slide the smaller bracket section away from the main body, then insert your number plate so it sits securely within the frame.
Step 3
Slide the bracket closed and tighten the M2 locking screws (highlighted in red). These are hidden behind the plate, keeping the finished installation clean and discreet.
You're done.
No drilling. No adhesive tape. Just a clean, secure fit that's built to last. Now take a step back and soak it in.
Bracket Buddy
Watch the Installation in Action
Note: The brackets are supplied with adhesive putty in each corner to ensure proper fit within the plate manufacturing tolerances and to prevent vibration. After the initial test fit, you may need to adjust by removing some of the putty.
Take care not to over-tighten the screws.
If you encounter any issues during installation, please feel free to reach out to us at info@theflexiplateshop.com.au